CAT 226
Built for versatility, the Caterpillar 226B Skid Steer Loader, with its many work tool options, is ideal for construction, landscaping, agriculture and other applications. It delivers traditional Cat reliability and durability with excellent productivity.
226B DETAILED SPECIFICATIONS
Engine Model Cat 3024C T
Engine
Net Flywheel Power 57 hp / 42 kW
Gross Power 62 hp / 46 kW
Gross Power SAE J1995 62 hp / 46 kW
Engine Power ISO 14396 61 hp / 46 kW
Net Power EEC 80/1269 57 hp / 43 kW
Net Power EEC ISO 9249 57 hp / 43 kW
Net Power SAE 1349 57 hp / 42 kW
Displacement 134 in3 / 2.2 L
Stroke 3.9 in / 100 mm
Bore 3.3 in / 84 mm
Operating Specifications
Rated Operating Capacity 1500 lb / 680 kg
Rated Operating Capacity w/Optional Counterweight 1600 lb / 726 kg
Tipping Load 3000 lb / 1360 kg
Breakout Force, Tilt Cylinder 4084 lb / 1852 kg
Breakout Force, Lift Cylinder 3341 lb / 1515 kg
Breakout Force, Lift Cylinder (HF) 3306 lb / 1499 kg
Weights
Operating Weight 5834 lb / 2646 kg
Operating Weight (HF) 5903 lb / 2677 kg
Wheelbase 39 in / 986 mm
Length w/Bucket on ground 127 in / 3233 mm
Length w/o Bucket 99 in / 2519 mm
Height to top of Cab 77 in / 1950 mm
Vehicle Width over tires 60 in / 1525 mm
Max Overall Height 146 in / 3709 mm
Hinge Pin Height at max lift 112 in / 2854 mm
Hinge Pin Height at carry position 9.3 in / 239 mm
Reach at max lift and dump 20 in / 505 mm
Clearance at max lift and dump 85 in / 2169 mm
Ground Clearance 8 in / 195 mm
Departure Angle 26 Degrees / 26 Degrees
Bumper Overhang behind rear axle 38 in / 967 mm
Maximum Dump Angle 40 Degrees / 40 Degrees
Turning Radius from Center - Left 58.5 in / 1485 mm
Turning Radius from Center - Right 47.2 in / 1199 mm
Turning Radius from Center - Full 76.4 in / 1940 mm
Max. Reach w/Arms Parallel to Ground 50.4 in / 1280 mm
Rack Back Angle at Max Height 96.7 Degrees / 96.7 Degrees
Hydraulic System
Hydraulic Flow Standard flow
Loader Hydraulic Pressure 3335 psi / 23000 kPa
Loader Hydraulic Flow 15.6 gal/min / 60 L/min
Loader Hydraulic Flow (HF) 26 gal/min / 100 L/min
Hydraulic Power 30.4 hp / 23 kW
Hydraulic Power (HF) 50.6 hp / 37.7 kW
Cab
ROPS SAE J1040 MAY94 and ISO3471:1994
FOPS SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
FOPS Level II SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II
(optional)
TORO DINGO 
The Dingo TX 420 is designed with workers in mind. All of its power is harnessed in only 3 easy to use controls, which make it simple for any worker to step up and be productive immediately! This power can be used to run over 35 Toro Dingo attachments. Its walk behind operator position provides 360° of visibility and outstanding operator mobility. When you step up to the Toro Dingo TX Compact Utility Loader, you can almost feel the power!
 |
TLB-220 MINI-BACKHOE SPECIFICATIONS
|
||||
| OVERALL DIMENSIONS | TIRES | ||||
| LENGTH: | 16' ( 4.87 m ) |  |
Front: 23 x 10.5-12 | ||
| HEIGHT: | 82.5" ( 2.09 m ) | Rear: 31 x 15.5-15 | |||
| WIDTH: | 56" ( 1. 42 m ) |  |
|||
| WHEELBASE: | 65" ( 1.65 m ) | CAPACITIES | |||
| BUCKET WIDTH: | 56" ( 1.42 m ) | Fuel: 12 gallons ( 45.6 L ) | |||
| GROUND CLEARANCE: | 9" ( 22.8 cm) | Hyd. Oil: 10 gallons ( 38 L ) | |||
|
|||||
|
LOADER | ||||
| ENGINE | Single Lever Power Hydraulic with | ||||
| Gasoline: | Bucket Float | ||||
| Robin EH65D-20 hp, air-cooled (std.) | Bucket Capacity: 1/3 cu. yd. (.25 cu. m) | ||||
| Kohler CH20S-20 hp, air-cooled (optional) | Breakout Force: 2600 pounds (1170 kg) | ||||
| Diesel: NA | Lift Capacity: 1700 pounds (765 kg) | ||||
|
Digging
Depth: 4" (10.2 cm ) |
||||
| TRANSMISSION | |||||
| Eaton HD Hydrostatic ( 35 hp rated ) | BRAKES | ||||
|
Hydrostatic service brakes | ||||
| DRIVE MOTOR | Band type parking brake | ||||
| Ross ME series | |||||
| BACKHOE: ESL™ design | |||||
| POWER STEERING | Digging Force: | ||||
| Load-sensing hydraulic steering with | 2875 pounds (1293.75 kg) @ Bucket | ||||
| balanced steering cylinder | 2265 pounds (1019.25 kg) @ Dipper | ||||
| Digging Depth: | |||||
| DIFFERENTIAL | 8' 4" ( 2.54 m ) | ||||
| Limited Slip | ( 7' 6" [ 2.29 m ] 2' flat bottom ) | ||||
|
Buckets: | ||||
| SPEED RANGE | 9" (22.9 cm), 12" (30.5 cm) (std.), | ||||
| 0 to 5.5 MPH ( 0 to 8.8 km/h ) | 16" (40.6 cm), 18" (45.7cm), | ||||
|
24" (61 cm), 36" (91.4 cm) | ||||
| WEIGHT | Swing: 180 degrees w/ cushioned | ||||
| 3115 lbs. (1406 kg) | swing cylinders | ||||
|
Reversible grouser pads | ||||
| TRANSPORTATION LENGTH: | Stabilizers extened to 10" ( 25.4 cm ) | ||||
| 12" 10' ( 3.91 m ) | below grade | ||||